Community R6-51 Dokumentacja Strona 14
- Strona / 28
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Community R6-51 and R6-BASSHORN Installation / Operation Manual — Page 14
GENERAL MOUNTING INSTRUCTIONS
The R6-51 and the R-6 BASSHORN are each equipped with four primary mounting points. Each point consists
of a 1/2”-13 threaded inset. In all cases, a minimum of two points - on opposite sides of the enclosure - (total of
four points) should be used to mount R6-51 or R-6 BASSHORN loudspeaker.
ACCEPTABLE MOUNTING POINT LOADING
The mounting points should always be used so that either (1) shear force is applied perpendicular to the
direction of the mounting hole or (2) tension force is applied perpendicular to the enclosure surface. They should
be tightened to a setting of 35 foot-pounds using a torque wrench.
DANGER: Use the four mounting points only as described herein and depicted in the
ILLUSTRATION below. Failure to follow these instructions could result in immediate failure of
the mounting points with resultant damage to the loudspeaker, and serious injury or loss of life
to personnel.
MOUNTING AN R6-51BIAMP OR R6 BASSHORN
Mounting requirements for large loudspeakers such as the R6-51 and R6-BASSHORN vary widely depending
on the needs of the application. For this reason Community does not supply a yoke, fasteners, or any other
mounting hardware with the R6-51 or R6-BASSHORN. The installer must supply all such hardware and is
responsible for designing a secure mounting system for the loudspeaker. In the USA, the overall
mounting system should be approved by a licensed P.E. (Professional Engineer) or other competent
authority. Outside of the USA, a professional mechanical engineer, competent in his or her field of
jurisdiction, should approve/certify on the design of the mounting system prior to installation.
The R6-51 and R6-BASSHORN have four primary mounting points consisting of ½” x 13-TPI stainless steel
inserts. These are suitable for suspension of the loudspeaker. Two are located on the rear; one is located on the
top, and one on the bottom. The R6-51 and R6-BASSHORN both provide an additional 10 holes in the front
enclosure flange intended for supplemental support. These holes are not designed for primary suspension
,
nor are they suitable for safety-cable attachment.
They are intended for use ONLY as supplemental
mounting points for support of the front of the loudspeaker. Note that on the R6-51 three bolts on the top and the
bottom of the enclosure are used to fasten the mid-high pack to the inside of the loudspeaker. These bolts are
not suitable for suspension or for safety-cable attachment. They should NOT be utilized in any way for
mounting or rigging.
MECHANICAL INSTALLATION
- R6-BASSHORN 1
- EC STATEMENT OF CONFORMITY 2
- WELCOME TO COMMUNITY 3
- TABLE OF CONTENTS 4
- IMPORTANT SAFETY INFORMATION 5
- UNPACKING 6
- INTRODUCTION / FEATURES 7
- PRODUCT DESCRIPTIONS 8
- QUICK START-UP GUIDE 9
- SIGNAL PROCESSING 10
- POWER AMPLIFICATION 11
- ELECTRICAL INSTALLATION 12
- MOUNTING POINT DIMENSIONS 13
- MECHANICAL INSTALLATION 14
- MECHANICAL INSTALLATION 15
- RIGGING CONSIDERATIONS 16
- TECHNICAL SPECIFICATIONS 18
- (CONT’D) 19
- SYSTEM OPTIMIZATION 20
- INTERNAL WIRING GUIDE 21
- IN CASE OF DIFFICULTY 22
- FIELD SERVICE 23
- VALID IN THE USA ONLY 23
- OBTAINING WARRANTY SERVICE 23
- SYSTEM SETTINGS: 25
- INSTALLATION NOTES 25
- R-SERIES OPERATING DISTANCES 27
Powiązane produkty i podręczniki dla Głośniki Soundbar Community R6-51
Głośniki Soundbar Community DS8SUB Dokumentacja
(12 strony)
(12 strony)
Głośniki Soundbar Community D10SUB Dokumentacja
(32 strony)
(32 strony)
Philips Forecast 190163836 manuales
Manuales del propietario y guías del usuario para Iluminación De La Pared Philips Forecast 190163836.
Ofrecemos 1 manuales en pdf Philips Forecast 190163836 para descargar gratis por tipos de documentos: Ficha de datos
Komentarze do niniejszej Instrukcji